Basics:
GS=Gap Short (shortened electrode space)
DE=Double Ended (double-sided lamp with threaded pin)
SE=Single Ended (one-sided lamp)
PAR=Lamp built in a parabolic reflector
HMP=Due to their special filling and to their electrode system, HMP-lamps cannot only be "dimmed", but also be "boosted", i. e. be operated beyond their rated power. During this, the light technical characteristics, such as color temperature, color rendering index and light output are practically constant during "dimming" and "boosting".
HMI / MSR / HMP / OMI lamps
- Extremely high light output
- Best color rendering
- Light output three to four times higher in comparison to filament light
- Light is generated via an arc between two electrodes
- Spectrum similar to daylight (between 4500 and 6500 K)
- Constant color temperature and color rendering behaviour over the whole lamp life
- Photographic industry
- Halogen metal evaporation lamps provide a spectrum composed of a lot of lines, in contrast to temperature radiators, as halogen-incandescent lamps
| Type of lamp: | Metal halide lamp |
| Manufacturer: | PHILIPS |
| Voltage: | 100 V |
| Wattage: | 1200 W |
| Current: | 13.8 A |
| Socket: | G-38 |
| Luminous flux: | 110000 Lm |
| Burning position: | Any |
| Arc gap: | 10 mm |
| Color temperature: | 6000 K |
| Color rendering index (CRI): | 95 Ra |
| Lifetime: | 1000 h |
| Dimmable: | Yes |
| Hot restrike: | Yes |
| Diameter: | 40 mm |
| Height: | 200 mm |
| Shipping weight: | 0.466 kg |
| Ecodesign regulation: | Yes |
| Special product: | Not suitable for household room illumination |
| Purpose: | Show effect lighting |
| | EU energy labels printed on the carton may be wrong. |
| | The correct energy efficiciency class is available from the manufacturer's system. |
